AVIMAR
Fire Fighting Equipment / Apparel
Please contact for the competitive prices
FIRE HELMETS
FIRE BOOTS
FIRE GLOVES
HOODS
FIRE FIGHTING SUITS
SUSPENDERS
All Eagle Models have the following features:
"H" Back style
Heavy duty non-stretch shoulder straps
Metal Spring Clips
Silent Eagle:
Non-Reflective straps:
# S60 Traditional 8 point, 46" long
# S63 Traditional 8 point, 49" long
# S66 Bib Pants, 6 point (4 front/2back), 35" long
Silver Eagle:
Reflective material woven in straps
# S50 Traditional 8 point, 46" long
# S53 Traditional 8 point, 49" long
# S56 Bib Pants, 6 point (4 front/2back), 35" long
EQUIPMENT BAGS
AFB40RS
23" x 14" x 13"
AFB60RS
23" x 14" x 17"
AFB80RS
One of the biggest gear bags in the industry:
29" x 17" x 16"
Main gear compartment (18" x 17" x 16")
Four Additional Pockets including an Extra Large Helmet Pocket
Reflective Trim along Straps and on both sides
Vented Main Compartment with Velcro Flap closure
Shoulder Carry Strap for Heavy Loads
"Fire Fighter" printed on straps with Maltese Cross on front
Now Available with WHEELS for faster and easier mobility!
AFB85RS
(a smaller version of the AFB80RS)
BREATHING APPARATUS
Complete with: 7 litres x 200 bar air cylinder, belts nozzle, mask, 50 minutes life
Spare Air Cylinder
Spare air cylinder 7 litres
ESCAPE BREATHING APPARATUS
Complete with: 3 litres x 200 bar air cylinder, straps, nozzle. 20 minutes life.
Approved type
EMERGENCY ESCAPE SMOKE FIRE HOOD
EVAC- U8 Emergency Escape Smoke Hood
The EVAC-U8 compact smoke escape hood provides filtered breathable air for up to 15 minutes in any smoke-filled environment.
80% of people who die in a fire were overcome by toxic smoke before they could escape to safety.
Evac-U8 smoke hoods provide basic respiratory protection from toxic smoke, Hydrogen Cyanide, Acrolein and Hydrogen Chloride.
This is a filter only and does not supply wearer with breathable oxygen.
Simply twist the lid off the canister, pull the hood on and breathe through the mouthpiece.
Built into the smoke hood canister is a multi-stage, air-purifying, chemical catalytic filter that removes carbon monoxide and other deadly gases present in fire.
EVAC-U8's transparent Kapton® heat-resistant hood, protects eyes and head from transient flame, allowing you to see and hear.
Its superior mouthpiece and positive pressure hood design make it resistant to edge leakage.
Slightly larger than a beverage can, the canister features a powerful luminescent bottom to help you find it in dark or unfamiliar places and helps others find you.
Easily mounts on wall near escape route.
It requires little training, maintenance and no fit testing is required.
One size fits all.
Not for use by children under age 10.
EVAC-U8 Smoke Hood Features:
Easy to use
Glow in the dark canister
Comes with wall mount bracket
Filters out carbon monoxide
15 minutes of breathable air
5 year shelf life
Transparent hood resists heat and transient flame
Weighs only 11 ounces
FIREMAN SAFETY LINE
Wire core, snaphook, 20 metres. R.I.Na approved.
FIREMAN AXES
Fireman Axe with Sheat
Steel made with insulated shaft with sheat
Fireman Axe with Long Shaft
FIREMAN CROWBAR
Steel made, cm 120
FIRE BLANKETS
Available sizes:
Size cm 100 X 150
Size cm 150 X 200
RETRACTABLE TYPE FALL ARRESTER
Shock absorber. CE E.N. 360
FIRE TOOL SETS
Composed by:
3 screwdrivers, 1 crowbar, 1 chisel, 1 monkey spanner, 1 hammer
THERMAL IMAGERS
FIRE NOZZLES
MONITORS
TURRETS
VALVES
VALVE CONTROLLERS
Model: AB-9305
Navigator Valve Controller with Pressure Meter and Flow Meter
Offers the all-in-one solution!
A new innovative design, provides a single, easy to read controller and pressure/flow meter, resulting in less confusion and better panel space utilization.
Single unit provides flow and pressure readings along with electric valve control
Uses 1/3 less panel - Actual size: 4 3/16'' x 6 3/16''
5/8'' high red LED’s for flow and pressure readout
Available in gpm and lpm
Model: AB-9304
Navigator Valve Controller with Pressure Meter
This dual function unit provides constant pressure information with valve control in a compact, easy to read controller/pressure meter.
• Single unit provides pressure readings along with electric valve control • Pressure feature is self calibrating
• Retrofit capabilities
• Uses less panel space than separate controller and gauge - Actual size: 4 1/4'' x 4 1/4'' • 1/2'' high red LED’s for pressure readout
• Available in psi and kpa
Model: AB-9303
Navigator Valve Controller
A compact, easy to operate, easy to install controller for electric operation of the valve.
Same as Model: AB-9304 minus pressure meter.
ELECTRIC ACTUATORS
Electrically driven worm gear rotates a gear sector for smoother and easier operation with no switches inside the gear actuator to malfunction.
Valve opening and closing speed is preset to comply with the current NFPA 1901 Standard
Operates on 12 or 24-volt apparatus electrical systems - Must specify
Gear drive ratio:
2" - 3 1/2" Swing-Out™ Valves - 16:1
Model: AB-7840 - 64:1
Model: AB-8840 - 25:1
Butterfly Valve - 64:1
Available on 8620-8635 and 7940-7960 valves
Manual override
MANUAL GEAR ACTUATORS
For operation of hard-to-operate valves such as on a deck gun, side discharge or ladder pipe.
Fits 2" to 4" valves
Handwheel driven worm gear rotates a gear sector for smoother and easier operation under pressure
2" to 3 1/2" valves have a 50:1 ratio and a 4" handwheel
8840 valves have a 50:1 ratio and a 6" handwheel
Number of turns for full open/close:
8620 to 8635 - 12 1/2 turns
8840 - 12 1/2 turns
Optional Position Indicator shows the position of the valve ball to meet NFPA 1901
Must specify side mount (landscape) or top mount (portrait) - Size: 3 1/2" x 5 3/4"
Auxiliary Position Indicator also available
Opening and closing speed complies with the current NFPA Standard to minimize effects of water hammer
Helps prevent valve drift and accidental slamming open or closed
Retrofittable to 7820 - 7840 valve bodies
AIR ACTUATORS
The Air Actuator uses the apparatus air supply and is equipped with an emergency override in case of an air supply shortage.
Designed for full open/close application only.
The unit is supplied with two air flow control valves to regulate the opening and closing valve speed to comply with the current NFPA 1901 Standard.
Operates to -10° F and requires 80-120 psi air pressure.
Available on 4" Swing-Out™ Valves and all Butterfly Valves.
Solenoid and switch not included
FLOW/PRESSURE METERS
Flow Pressure Meter
Programmed calibration - More reliable than mechanical methods
More accurate through broad ranges of flow - Technically advanced electronics
Flow & pressure - One meter provides both flow and pressure readings
Easier installation - Valve adapters available for quicker/easier installation. Saddles and weld bosses also available
Fully tested - Vibration, high & low temperature, high flow & pressure, endurance, actual field tests
Meets NFPA 1901 for accuracy
Standard 5 year warranty
Model: AB-9300
Flow/Pressure Meter
Includes meter, flow sensor, pressure transducer and cable connectors plus two cables (Choice of 5', 10' or 20')
Flow port valve adapters ordered with valve
Saddles and weld bosses must be ordered separately
Portable Flow Meter
Model: AB-9301
Portable Flow Meter
A technologically advanced flow and pressure meter with stainless steel paddle wheel
Solid state electronics with no moving parts to adjust
Includes a heavy duty storage case, 12V internal battery, 110V AC battery charger, 12V DC auto cord power supply
Backed by Akron’s 5 year warranty
Width: 20 1/2", height: 17 1/2", depth: 8 1/2"
Maximum flow through 2 1/2" sensor body is 1250 gpm
Weight: 30 lbs.
Water Flow Test Kit
Model: AB-9015
Water Flow Test Kit
U.L. classified for testing
Six machined tips measure flows ranging from 110-1600 gpm (400-6000 lpm) at 40-120 psi (280-830 kPa)
Holds pitot tip firmly in correct stream position - eliminates many variables caused by hand-held units
Grade-1A, 100% tested gauge in easy-to-read increments
1% full range accuracy
Complete with tough, molded carrying case, instruction booklet and laminated flow chart
U.S. standard measurements or metric equivalents
Standard tip Sizes: 3/4", 1 1/8", 1 1/2", 1 3/4", 2", 2 1/4"
Optional tips available: 15/16", 1", 1 1/4", 1 7/8" (optional tips not U.L. classified)
Width: 18 1/2", height: 15", depth: 6 1/4"
Weight: nozzle with pitot, 7 lbs., case, 17 lbs.
FANS
Gasoline Power
24" Blower - 5.5 HP Honda motor
GF210 21" Blower - 5.5 HP Honda motor
GF165 16" Blower - 5.5 HP Honda motor
GF165SE 16" Blower - 5.0 HP Honda motor
GF164SE 16" Blower - 4.0 HP Honda motor
Electric Power
1.5 hp for 60 Hz
EF390H 1.75 kW for 50 Hz
Water Power
Water Power
High Pressure Water Power
Smoke Ejectors
50 Hz & 60 Hz options
Rescue Models
8" Confined Space Model
8" Hazardous Location Model
12" Hazardous Location Model
50 Hz & 60 Hz options
FIRE PUMPS
FIRE HOSES
HOSE EQUIPMENT
Suction Strainers
339
Basket Suction Strainer
An economical, high capacity suction strainer with galvanized plated mesh for longer life.
Available in 2 1/2" and 5" size NH and other selected threads
5" weight: 5 3/4 lbs.
340
Barrel Suction Strainer
Heavy-duty barrel suction strainer with rope eye.
Capable of flowing large volumes of water to match today’s high capacity pumpers.
Pyrolite® finish
Available in 4" through 6" NH
5" weight: 4 1/4 lbs.
344
Barrel Suction Strainer
Heavy-duty barrel suction strainer designed to accommodate large volumes of water.
Steel with nickel chrome plate
Available in 2 1/2" and 3" size NH and other selected threads
2 1/2" weight: 3 lbs.
Hose Jackets
772
2 1/2" Hose Jacket
For emergency repair of burst or leaky hose - or as an emergency adapter for the connection of two hose lines with different threads in situations where pressures do not exceed 150 psi.
Akrolite construction
Molded neoprene liner
Fits all 2 1/2" hose from 2 3/4" to 3 5/16" O.D.
Length: 13"
Weight: 16 1/2 lbs.
773
3" Hose Jacket
Same as Style 772, except: Fits 3" hose from 3 1/2" to 3 3/4" O.D.
Length: 15"
Weight: 26 3/4 lbs.
352
2 1/2" Hose Jacket Mounting Peg
For mounting 2 1/2" Hose Jacket on a running board or in a compartment
Length: 13 3/8"
Weight: 2 1/4 lbs.
353
3" Hose Jacket Mounting Peg
Same as 352, except for 3" Hose Jacket
Length: 15 1/2"
Weight: 3 1/4 lbs.
Hose Clamp
588
Hose Clamp
For use on double-jacketed woven hose up to 3"
Features rubber jaws and lock
Lightweight for easier handling
Supplied with 589 mounting bracket
Length: 30"
Weight: 16 lbs.
589
Hose Clamp Mounting Bracket
For 588 Hose Clamp
FITTINGS & ACCESSORIES
Adapters
326
British Instantaneous Adapter
For converting nozzle threads to British Instantaneous Male (BIM)
Cast brass or Pyrolite® construction
2 1/2" x 2 1/2" Pyrolite weight: 14 oz.
335
Double Female Adapter
For changing threads from male to female
Brass with chrome finish, all sizes, Pyrolite noted with asterisk (*), cast noted with (†)
2 1/2" weight: 4 7/8 lbs. brass, 1 1/4 lbs. Pyrolite
336
Double Male Adapter
For changing threads from female to male
Brass with chrome or cast finish all sizes, Pyrolite noted with asterisk (*)
2 1/2 weight: 2 1/2 lbs. Brass, 14 oz. Pyrolite
354
Female Swivel to Male Adapter
Available in sizes from 2 1/2" to 6" long handle swivel standard - rocker lug optional
Brass with chrome finish
357
Double Female Swivel Adapter
For changing hydrant or suction threads from male to female
Brass construction with chrome finish, all sizes, Pyrolite noted with asterisk (*)
Available in sizes from 3 1/2" to 6"
Long handle or rocker lug
4 1/2" x 2 1/2", weight: 11 1/2 lbs. brass, 4 1/2 lbs. Pyrolite
1422
Rigid Direct Connect Base
For adapting an 1 1/2" nozzle base to a 2 1/2" hose line
Pyrolite construction
2 1/2" female x 1 1/2" male
Tapered waterway for reduced turbulence
Weight: 12 oz.
422
Rigid Direct Connect Base
Same as 1422 except brass with cast or chrome finish
Weight: 1 1/2 lbs.
331
Long Internal Lug Adapter
Cast or chrome
Same as 330 except for 4" length
Available in 2 1/2" female NPT x 2 1/2" male only
Weight: 2 5/8 lbs.
330
Short Internal Lug Adapter
To convert pipe threads to male hose thread
Cast or chrome
Length 2 1/4"
2 1/2" x 2 1/2" weight: 1 1/2 lbs.
338
Suction Lug Adapter
For changing male pipe thread to female hose thread
All sizes available in chrome - Cast noted with asterisk (*)
Built-in strainer for use on suction inlet
Length: 2 3/4"
2 1/2" Weight: 2 5/8 lbs.
361
Double Male Hex Nipple
For changing female pipe thread to male hose thread
All sizes available in cast - Chrome noted with asterisk (*)
2 1/2" x 2 1/2" Weight: 1 3/4 lbs.
362
Female to Male Hex Nipple
For changing male pipe thread to male hose thread
All sizes available in cast - Chrome noted with asterisk (*)
1 1/2" x 1 1/2" Weight: 3/4 lbs.
337
Rigid Female to Male Adapter
All sizes available in cast and chrome from 3/4" to 3 1/2" - Pyrolite® noted with asterisk (*)
2 1/2" x 1 1/2" Weight: 1 1/2 lbs.
356
Rigid Female to Male Adapter
All sizes available in chrome - Cast noted with asterisk (*)
4 1/2" x 2 1/2" Weight: 6 1/2 lbs.
Caps, Plugs, Elbows
Elbows
630
30°/45° Angle Elbow
For use on pumper discharge valves to minimize hose kinking
Brass construction
All sizes available in chrome, cast noted with asterisk (*)
2 1/2" x 2 1/2" weight: 4 1/8 lbs.
2 1/2" & 3" sizes available in 30° only
4" size available in 45° only
632
90° Suction Elbow
For use on the suction inlet
Brass construction
Body painted red
All sizes available in chrome, cast noted with asterisk (*)
2 1/2" x 2 1/2" weight: 5 7/8 lbs.
655
90° Front Suction Elbow
For use on front suction
Cast brass
Built-in strainer and vertical twist lock
4" weight: 36 lbs.
635
Continuous Swiveling Elbow
To allow a hose to swing when connected
Cast brass
Full 2" waterway and cast-in turning vanes reduce friction loss
Works well on crosslays with eductor systems
2" x 1 1/2" x 2 7/16" weight: 3 3/4 lbs.
633
30° Discharge Elbow
For use on the pumper discharge
Chrome finish
2 1/2" NPT X 2 1/2" NH weight: 3 lbs.
650
Swiveling Elbow
For aerial applications
Pyrolite® finish
Full flow waterway and cast-in turning vanes for reduced friction loss
Available in 4" and 5" sizes
Height 12 1/2"
Weight: 8 3/4 lbs.
631
60° Angle Elbow
For high-rise stand pipes
Pyrolite finish
2 1/2" female x 2 1/2" male
Weight: 1 7/8 lbs.
Caps & Plugs
347
Hose Plug
For plugging female threads
Brass construction, all sizes available in chrome finish, cast finish noted with asterisk (*)
All sizes available with rocker lug
Chain optional through 4"
2 1/2" weight: 2 1/2 lbs.
345
Hose Cap
For capping male threads
Brass construction, all sizes available in cast or chrome finish
All sizes available with rocker lug, 2" and 3" available with long handle
Chain optional on all sizes
2 1/2" weight: 1 7/8 lbs.
FIRE EXTINGUISHERS
BONPET
(Innovative Fire Extinguisher)
A revolutionary fire extinguisher that changes the working method and the culture of usage pattern of the conventional extinguisher.
BONPET can be called the "three-in-one" innovative extinguisher.
The "Three-in-one" feature represents three modes of operations.
Etymologically in Japanese language, "BON" means good, "PET" means lovely.
So BONPET means a good product with lovely packaging.
BONPET does not need any maintenance during the ten-year life span.
It comes in the form of a cylinder-shaped glass ampoule which is heat resistant.
Everybody can use it without any need for prior training.
Non toxic and safe for human life.
When the ampoule bursts, both the gas and liquid emissions are harmless.
Technical Data:
Length: 27,5 cm
Diameter: 6 cm
Overall Weight (Ampoule & Holder) : 1030 Gram
Net Weight (Ampoule Only) : 795 Gram
Volume: 600 CC
Extinguishing Area : 7 - 10 m2
Pre Burned Time: ± 1 Minute 16 Seconds
Average Temperature When BONPET ampoule explodes: 290 - 350° C
Effective Extinguishing Time: ± 7 - 17 Seconds
HOW TO USE BONPET
You can use the Automatic fire extinguisher Bonpet in three ways:
1- Automatic use
When the fire breaks out in a closed area, the temperature of the room rises and the chemical solution in the ampoule Bonpet decomposes and generates a gas which causes the increase of the pressure in the ampoule.
When the temperature of the solution reaches app. 90°C, the ampoule automatically bursts showering the solution over the burning area.
When Bonpet is installed at the height of 2 meters, the solution will be spread in a radius of 2 meters,
The showering solution causes a strong cooling effect and carbon dioxide pushes the oxygen off from the fire area.
A thin film of sulphate is forming over the burning area preventing the fire from reigniting.
In the end of chemical reaction the final products are water, salt and carbon dioxide.
How it works
BONPET is screwed onto the ceiling or the wall
Light Up Fire
Fire
When the temperature within the ampoule reaches above 90°C, it will turn into gas thus causing the ampoule to burst and the solution is showered over the burning area.
In this way BONPET automatically and instantaneously extinguishes the fire before it gets out of control.
Fire extinguished
2-Throwing method
When the fire breaks out indoors at the presence of somebody, the ampoule can be taken out from holder and be thrown against a wall above or near the fire, so that the chemical solution will be sprayed over the burning object. The fire will be quickly put out.
3- Mixing with water for fighting against large fire
By mixing solution of one Bonpet ampoule with 8 – 10 litres of water you get a very effective mixture to put out a fire.
PLACE OF INSTALLATION
Yachts / Boats
Passenger Ships / Cargo Ships / Tankers / Trains / Airports / Seaports / Terminals / Shops / Houses / Office Buildings / Apartments
Residential Housing / Mall & Plaza Factories / Warehouses / Hospitals / Clinics / Laboratories / Hotels / Restaurants / Entertainment Centres etc.
ESCAPE CHUTES
Outdoor Type
Outdoor consist of 3 layers.
The outside layer is fire resistance material.
Tthe function of middle elastic layer is to enable the users to control their speed when descending.
The inner layer holds 1.5 ton/m.
Type : Stationary Installation in a building
Type of system: Vertical escape chute
Max. action height: 100m
Material used: Flame retardant impregnation
Sliding speed: It's depend on user(you can stop, or down slowly)
Lengt : 3 to 100 meters
Material : Polyester / Stainless spring
Indoor Type
Indoor model can be permantly installed and it can be used in a second.
It can be used by the elderly and weak and save 25 person per minute without difficulties.
Type of system : Vertical escape chute
Max. action height : 8 ~ 35m
Material used: Flame retardant impregnation
Sliding speed: It's depend on user(you can stop, or down slowly)
RESCUE NETS
An emergency helicopter rescue net is designed to save people from high buildings or other areas accessible only from air.
